Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Munchkin

Options
George @ Dynamic Plumbing_2
George @ Dynamic Plumbing_2 Member Posts: 1
in THE MAIN WALL
Define what your blower issues are.
I have about twenty Munchkin boilers installed with no real problems, with the oldest being about nine years old.
We pay close attention to good installation practices.
On one boiler we had a frequent ignition problem which was traced to arcing to the boiler core from the ignition cable which was solved with the application of silicone grease to the ignitor boot.

Comments

  • jerm
    jerm Member Posts: 7
    Options


  • jerm
    jerm Member Posts: 7
    Options


    Blower issues have been on wall mounts.
    Possibly from moister dripping down directly onto blower from air inlet in the case of snow etc.
    Heat Transfer has put a boot under air inlet on more recent models. I Believe they have Corrected the problem.
    Overall a very good Product.
    Just wondered if anybody else ran into same issue.

  • Mark Hunt
    Mark Hunt Member Posts: 4,909
    Options
    9 years old eh?

    I didn't realize that they were available in the US that long ago. That being said, we have been installing them as long as they were available in NY.

    HTP is a great comapany with great people. They stand behind their product all the way.

    I never saw a product make more of an impact on this industry than the Munchkin.

    Therms/degree day reductions never less than 35%.

    HTP keeps tweaking it to make it better. A sign of a great comapany.

    Mark H




    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
This discussion has been closed.

Categories