Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Boiler back-up
John_56
Member Posts: 33
I in the process of installing a geothermal heat pump on an infloor system. I have done this several times with great success, but this time i am trying something different. I am installing a Buderus wall hung with an indirect water heater for the domestic hot water and I want to tie the boiler into the hydronic system to provide supplimental heat. I would be interested in suggestions on the best way to do this. I do have a buffer tank with the heat pump. Thanks in advance.
John
John
0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements