Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
BSP Threads

lthiesen
Member Posts: 19
This is a plumbing question but I am hopeing someone has done this before. I am looking for a fitting to adapt from 3/4 BSP threads to 3/4 or 1/2 pipe threads. Does anyone have an idea? Thanks, Lowell Thiesen, Thiesen Plb Inc.
0
Comments
-
Looks like this place has them. Stainless steel but perhaps brass is available as well.
http://www.coleparmer.com/catalog/product_view.asp?referred_id=778&sku=3183011
They come with Viessmann Vitodens boilers in brass. Both ends are female.0 -
Going the other way...
Looks like Parker has a conversion adapter that goes the other way from Mike T's link (i.e. BSPP female/NPT male).
I've attached a catalog page and you could get local retailer info from the complete catalog here Parker Pipe Fittings0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 105 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 159 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 948 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements