Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Beckett NX
Biged
Member Posts: 117
As anyone been using these oil burners? I'm just curious as to how it performs.I've never personal seen one myself and nobody on this site have spoken about them that I can remember.
0
Comments
-
NX
> As anyone been using these oil burners? I'm just
> curious as to how it performs.I've never personal
> seen one myself and nobody on this site have
> spoken about them that I can remember.
0 -
we have one on a new install. not sure yet how i like them the boiler set-up calls for a 60-60B nozzle but will not run for crap put in a 75-60B runs great. before you use them go to beckett web site and watch the vid. on them.0 -
First One Here
Putting in a Viessmann Vitorond 100; NX comes standard. Several guys around here have had problems with the cad cell seeing the fire; had to bend the eye bracket down a tad (away from the transformer). These were on Biasis. We'll find out!0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements