Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Low water cut off how do i know if I have one?
Joe.G
Member Posts: 213
Hi,I had a new peerless boiler installed with a indirect hot water tank (the boiler does have acoil I just don't use it) the boiler is aec series I think. I am wondering how do i know if I have a low water cut off? do they come fromt eh factory with them? thanks
0
Comments
-
if the boiler has a coil --it is a model ect they are not factory supplied with a low water cut off --was your boiler install filed,permits applied for and inspected ? post a picture of it and the piping0 -
I can't post pics, could you explain what it looks like? thanks0 -
ask your installer--was any of this job filed for and inspected? if this was a professional install it should have 1 if it was a guy who does heating and you got a deal anything is possible --0 -
The guy that installed it is a friend of my fathers who does this stuff for a living. I have already asked him a million ? and if I run into him i will ask him. But is there a way I can find out my self by looking at it? thanks0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements