Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Tekmar pros out there?

GW
Member Posts: 4,937
Hello,
I'm pretty clueless with the Tekmar stuff. Is there anyone out there that knows it good?
I have a need for several radiant zones. I prefer not to do the old "on-off" zone valve thing. I realize I can do HK1 or the Paxton/Buderus route. I'm wondering if doing injection may be easier. Some of these controls now a days don't have indoor sensing (Taco variable speed injection, as well as others), which doesn't work for me; I need indoor sensing. The boiler will have reset.
Gary
I'm pretty clueless with the Tekmar stuff. Is there anyone out there that knows it good?
I have a need for several radiant zones. I prefer not to do the old "on-off" zone valve thing. I realize I can do HK1 or the Paxton/Buderus route. I'm wondering if doing injection may be easier. Some of these controls now a days don't have indoor sensing (Taco variable speed injection, as well as others), which doesn't work for me; I need indoor sensing. The boiler will have reset.
Gary
0
Comments
-
Tekmar Pros
Where are you located Gary. Check out my website for geographical info.0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 105 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 159 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 948 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements