Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Heatlink mini manifold
Options
Kritz_3
Member Posts: 85
Has anyone had the problem of leaks from the stem of the
mini manifold? I have 2 on a 9 gang manifold that has been
in service since December 04. I don't see any packing that
I can replace.
Thanks ,Steve K.
mini manifold? I have 2 on a 9 gang manifold that has been
in service since December 04. I don't see any packing that
I can replace.
Thanks ,Steve K.
0
Comments
-
Yes -
phone their tech line direct - in Calgary AB. Mine were new out of the box - replaced under warranty. It was a small drip - but the HO was not convinced that it would make up.0 -
Heatlink mini
I will give them a call, and test the water.
Thanks, Steve0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements