Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
copper sulphide Black Dust
Bob Harper
Member Posts: 1,097
Does anyone have info. on this phenomenon such as clogging gas valves, causing delayed ignition, stuck valves,clogged burner ports, CO emissions, etc.? Any info. on how effective inlet screens or sediment traps are at catching the particles and preventing these problems? NG vs. LP? It is supposedle a problem if the hydrogen sulphide gets over 0.4 grains/m3, which I guess is why the gas codes call for a max. of 0.3 grains.
TIA,
TIA,
0
This discussion has been closed.
Categories
- All Categories
- 86.6K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 54 Biomass
- 423 Carbon Monoxide Awareness
- 99 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 157 Indoor-Air Quality
- 3.5K Oil Heating
- 66 Pipe Deterioration
- 931 Plumbing
- 6.2K Radiant Heating
- 384 Solar
- 15.2K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements