Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Nestor Martin Wood Stoves

Dan_15
Member Posts: 388
OK, this is not a boiler question, but hey this is "heatinghelp" so I thought I could still ask it. Im wondering if anyone has had any experience using a Nestor Martin cast iron wood stove, good or bad. They are multi-fuel stoves that are set up to burn wood or coal; Im thinking of getting one to offset some of my oil heating costs this winter. They have a pretty unique electronic control system that automatically adjusts the air intake based on indoor temperature feedback. Also a "set-back" feature that can sustain a low burn overnight and recover in the morning at a preset time. Im curious to know if this brand is reputable and long-lasting; can parts be obtained in the U.S.; will the servo motor that controls the air intake withstand the test of time under intense heat conditions. Any input is greatly appreciated. Thanks, Dan
0
This discussion has been closed.
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.6K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 970 Plumbing
- 6.3K Radiant Heating
- 385 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements