Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
steam boiler sections
Rodney Summers
Member Posts: 748
Can you help me with this one? Planning an installation for a 1 pipe gravity feed system with 650 sq ft of steam by oil requirement for two floor house. If in a few years I want to install an individual hot water system for the 2nd floor, what do I do with the extra steam capacity. Do I remove a section of the boiler or use a different oil burner nozzle. Or am I stuck with an inefficent oversized steam system? Can a section of the boiler be removed? JK
0
This discussion has been closed.
Categories
- All Categories
- 86.8K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 105 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 104 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 952 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements