Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

cast iron baseboard with steam

jhansen
jhansen Member Posts: 59
in THE MAIN WALL
should both tappings be utilized when joining cast iron in two pipe steam systems?

Comments

  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    Shouldn't need more

    than one tapping at each end. If the length/capacity of the baseboard exceeds what a 3/4-inch tapping will deliver, split the run into smaller sections.
This discussion has been closed.

Categories