Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Identify brand of modern baseboard
EBEBRATT-Ed
Member Posts: 17,357
Sterling Radiation???
Ed
Ed
0
Comments
-
Hi, yet another question for the terrfic group of wallers. The owner of the house I bought did all the baseboard in a new room, but never bought the endcaps and unions for it. The problem is that the only baseboard I know is the basic slant fin. This type is slightly staller and beefier and I know I have seen it in many other houses but have no idea what brand it is. This house is 7 yrs old and it is definitely sheet metal type just as described. Thank you for pointing me to what it might be. Thank you0 -
A photo of
the board would help, both the outside cover and the fin -Greg0 -
maybe its slant fin 30.
or embassy...there are a couple maybes0 -
Chris31782
I need to figure out what type of base board this is, Slant fin says not them, Embassy says not them. Anyone?? I need a right end cover. 2" wide at top,3"wide at bottom,9 1/4 rear,5" front before is dips in.0 -
Vulcan
Try Vulvans website0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 159 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 943 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements