Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
a/c size by mdl#
Dan Foley
Member Posts: 1,264
42,000 BTU, 7.6 SEER Manufactured 1970-1974
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=305&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=305&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
0
Comments
-
a/c size by model# help needed
I know this is wet heat sight but hped someone could help. I have a crysler M# 1274-50k S# 3k106044 does anyone no the size and seer. Thanks in advance
Jim Murtaugh0 -
SCROOL down
near the bottom and ask Silberstein!0 -
Dump it
It's an energy sucking pig. You should pay a KW guzzler tax on that thing.0 -
I remember
the Chrysler product line. Been gone a long time now. The commercial A/C units had a compressor that hung from a swivel joint suspended in the compressor compartment. It was hell to change out. Getting old in MD. WW
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements