Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Square Pipes
hr
Member Posts: 6,106
the fittings that are a challange :)
The boys at Radiant Engineering have done some custome square manifolds and headers. Not sure about ells, however.
hot rod
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=144&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
The boys at Radiant Engineering have done some custome square manifolds and headers. Not sure about ells, however.
hot rod
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=144&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
0
Comments
-
Square Pipes
Does anyone know of a U.S. supplier of the european "square pipes" that Dan talks about in the June issue of P&M? They hug the base of the wall and look like wooden base molding.0 -
Pipe is easy, it's
the fittings that are a challange
The boys at Radiant Engineering have done some custome square manifolds and headers. Not sure about ells, however. Talk about a square, unfriendly to flow, corner!
hot rod
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements