Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
GB on the shore of Lake George
Joe@buderus_2
Member Posts: 302
Checked with Diane, who handles the training here at Buderus, and the GB Training on the 7th is an open training class. The training class that N&S Supply is attending is on the 17th. Please contact N&S Supply regarding that training class. Thanks,
0
Comments
-
Another GB142 install
The customer really likes the looks of his new system. His next door neighbor who is 82 comes over everyday to check out the work and told me " you ought to be G*******m proud of yourselves for doing work like that, it is a pleasure to look at it"). We are trying out the Taco I-Radiant valve due to a tip from Mr. Milne. It should be the cats behind for temp control (slab). I was going to say I did not have much room to work with, but then I think of where Ron jr has to fit boilers into and did not feel cramped anymore. I have gotten myself into quite the GB routine now. I do have a G115 install coming up to get out of the wall hung rut. What a dilemma, right?
Darin0 -
Nice...
Nice work, Darin. How many GB's do you have installed, now? I have a couple of the i-radiant valves installed with good results. Is that snow on the ground? It has been in the 50's and 60's here (DC) for almost a week. Hopin' for some colder weather. -DF
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
That's purdy
nice again.
you'll like the i-series, it looks like you have it for setpoint instead of od reset?0 -
Thanks Dan
Yeah still some snow here, but is melting away. It has been in the high thirties here. The house is still cold to work in since the concrete slab is still very cold. Me and Mark were just trying to tally up all of our GB's. About 10 or 12 I think. He has some more sold to go in. I am interested in seeing how the I-Radiant performs. trying to keep electrical consumption down as well as the gas bill. The I-Radiant valve draws very little in power.
Take Care, Darin0 -
Good catch Singh
and in the amount of valuable work time he used up taking these pictures, he could have fixed that AND finished the staple-up!!!
Seriously, the system isn't ready to fire and Darin just finished up the wiring today. No fuel at the location yet as well as no doors. There are two zones of staple-up that need to be put up as well.
You going to Buderus in February??
Mark H
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Thanks Bud
The I-Radiant will be on outdoor reset(I didn't run the OD wire yet). I will be happy when the boiler itself will run off of outdoor reset. Soon I hope! I find very few applications to use the RC10 in. American heating is not very conducive to that type of control. Since most of Europe is panel rad or radiant ( one main zone) you can see how the RC 10 would work well there.
Thanks again, Darin0 -
Buderus in Feb
Devan, I still haven't seen you on the sign-up list? Going?
Another killer install, maybe you guys should teach the class in New Hampshire!
Rick0 -
Surplus
Yeah,I was trying to figure out what to do with those extra RC10's myself.
I'll see you guy's in Feb. I still have some questions about the GB.
Afterwards I was going to bring Rick next door and buy him a yogurt at the Stoneyfield yogurt factory.
Devan
0 -
I hope so!!
Joe was suppose to sign me up weeks ago.
I'll talk to him this week.
Devan0 -
Better do that
First thing tomorrow. we are only taking 20-25, all single rooms, dinner etc. Going to be fun. Please call Joe first thing and thanks again for your business!
Rick
0 -
Class sign up
To sign up for class please call 1-800-283-3787 and ask for Diane. She handles the sign ups for the training class. Look forward to seeing ALL of you guys in February.
OH yea! The install looks great so far. THANKS!!!0 -
Joe
I ment Joe G. @ N&S supply0 -
Nice work Darin!
Had to look at the piping from all angles to make sense of it, but it's all there. Very nice. Chris0 -
Thanks Chris
We will be looking to share a few beers with you in Feb when we are up for some schoolin. Too bad Scott is not going to be there. Boy oh Boy he always makes these big plans with us and then pulls the rug out from underneath us. I hope we can count on you!!! He He He
Thanks for the compliment, Darin0 -
Install
Another Great install Darin.Did you turn the pump cartridge on the main floor manifold?
Dobber0 -
Dobber
Yes I did turn the pump cartridge to make the wiring easier. And yes I did pop the grundfos tag off and put it back right side up.
Thanks, Darin0 -
Buderus
Is this on the 6th,7th? I'm signed up, hope to see all there. I'm very interested to tear into the GB. Have not used one yet. Mark you must be satisfied with this boiler? I would love to talk to you about it.0
This discussion has been closed.
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 95 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 156 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 928 Plumbing
- 6.1K Radiant Heating
- 384 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements