Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Best way to check a crack in heat exchanger

Guy_6
Member Posts: 450
The old timers used some oil of peppermint or wintergreen. Block the flue, put a few drops in the combustion chamber, and run the blower. If the minty freshness makes it upstairs the chances of a breach are good.
0
Comments
-
cracked exchanger
What is the best way to check a crack heat exchanger before a complete teardown?0 -
Oil Tech, There are a few ways but check this out.
Checking for Cracked Exchanger
Your friend in the industry,
Alan R. Mercurio
www.oiltechtalk.com
There was an error rendering this rich post.
0 -
Here's a link
to a post on Oil Tech Talk's gas heating forum that has plenty of information on checking for cracks.
HEAT EXCHANGER INSPECTION METHODS
0 -
Found a leaking heat exchanger
On an older gas furnace: The heat exchanger was cool. Placed my hand on the flue gas ouuutlet while turning the blower on 'Manual". I definitely felt an air flow on the combustion side of the furnace.0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 938 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements