Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Glenn Stanton

Unknown
Unknown
in THE MAIN WALL
I'll be taking it easy for some time to come but will still be stopping by here once in a while too! Just won't be getting into any intense stuff though. Been finding Jeffery Deaver's books to be a good way to get my mind off of other affairs!

Glenn Stanton

Manager of Training

Burnham Hydronics

U.S. Boiler Co., Inc.

Comments

  • Dan C.
    Dan C. Member Posts: 248
    Burnham IN5PV

    Is there a min/max distance off of the outside wall for the termination fitting. I looked in the instructions and couldn't find it. Thanks
  • Unknown
    Unknown
    Dan

    The manual states to install it so that the locking band or joint connector is flush with the outside wall or wall thimble. This is described in Paragraph "H", Item 5 and is referenced in Figure 10. Hope this helps.

    Glenn Stanton

    Manager of Training

    Burnham Hydronics

    U.S. Boiler Co., Inc.
  • Mark Hunt
    Mark Hunt Member Posts: 4,908
    Hey you!


    Knock it off!

    You get your bottom the rest it deserves and let it go for a while.

    Can't tell you how glad I was to see your posts Glenn, but you need to take care of Glenn now. Burnham will be ok for a bit without you.

    All my best Glenn! You are one of the greats!

    Mark H

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • Rodney Summers
    Rodney Summers Member Posts: 748
    hey there glenn....

    hey glenn,

    i thought the doctor said that you should be relaxing for a month!

    either way, i'm very happy to see you're 'up & posting about'.

    always nice to read what you have to say.

    here's to some more relaxation & a fast recovery.

    best,

    soot_seeker
  • Weezbo
    Weezbo Member Posts: 6,232
    *~/:)

    Your looking good :)

    what happened to the take it easy and get some rest part :)-...

    got the tie and three button suit out just to say hello to You :)-...

    It is a good thing you are up and about. We been steady chirping up the MPO's :)
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,610
    Welcome back.

    Nice to read you, Glenn.
    Retired and loving it.
  • BillW@honeywell
    BillW@honeywell Member Posts: 1,099
    Don't jump back into the shark tank too soon...

    Glad to see your post, take it easy for a while. There is life beyond all the bad food we road warriors eat. Welcome back!
  • Dan C.
    Dan C. Member Posts: 248
    ok

    Thank you I will check thst out
  • Edward A. (Ed) Carery
    Edward A. (Ed) Carery Member Posts: 138
    Glenn

    Hi Glenn,

    We have all missed you and do need you back, but as the others have said, PLEASE take your time!!!!!


    Best Regards,

    Ed Carey
  • tim smith
    tim smith Member Posts: 2,829
    Glad to see you here glenn

    Glenn, I am glad to see your response back here on the wall, please take care in your recovery. I hope you get well soon and I promise I won't post an inflammatory comment to get you going. Get well soon, Tim.
  • Terry_14
    Terry_14 Member Posts: 209
    Hope to train with you some day

    Any recovery is a good ! and knowledge is king in this industry.

    Hope you can post training seminars on wall I'd enjoy meeting some one as highly regarded as you.

    Offering prayers of thanksgiving for recovery
    Terry
  • Mad Dog_2
    Mad Dog_2 Member Posts: 7,668
    Yeah c'mon Glenn ........................................

    Get back in Bed. Now! That's an order....you can take your books with you. Mad Dog

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
    Consulting by Mad Dog & Matt Jr.
  • Doug Oest
    Doug Oest Member Posts: 34
    HEY YOU!!!!

    Cut the crap. You should be in the bahama's or something!!!

    I've been chasing an old Trane Vapor system. Got some big hep from a Tony Philpin- really knowledgeable guy... and of course Dan sent me the entire Trane Manual- thanks Dan... the diagram I'm looking for is right on page 11- perfect!!

    HAng in there bud. I know you probably feel like you're ready to join Ice Skating With the Stars right now, but, you still need to relax... but then again the doctors already told you that.

    I'll see ya when I see ya.
  • Unknown
    Unknown
    Thanks Doug!

    I'll miss not being with all of you the week after next but the Doc won't let me make the trip. While you are doing your thing on Monday, I'll be going through 4 hours of Stress testing. Want to trade? Give my regards to everyone in Lancaster!

    Glenn Stanton

    Manager of Training

    Burnham Hydronics

    U.S. Boiler Co., Inc.
  • Doug Oest
    Doug Oest Member Posts: 34
    Don't want to trade

    Hmm, I wonder... Sales meeting or stress test? I think may be the stress test... ah, what the heck... I'll come up and walk the treadmill with ya!!! LOL!!!

    Take care bud... I'll see ya when I see ya. Just keep doing what the doc says.
This discussion has been closed.

Categories