Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Oil Tech Talk site down? (Steamhead)

Steamhead (in transit)
Steamhead (in transit) Member Posts: 6,688
in THE MAIN WALL
saynig the site cannot be found..... Alan, I hope you didn't get hacked again.

Comments

  • Eugene Silberstein 3
    Eugene Silberstein 3 Member Posts: 1,380
    Definitely...

    Definitely not working...
  • Joe Grosso
    Joe Grosso Member Posts: 307


    Works for me, just real slow
  • Robert O'Connor_11
    Robert O'Connor_11 Member Posts: 42
    Working but

    very slow these last few days

    All the best

    Robert

    ME
  • Glenn Harrison_2
    Glenn Harrison_2 Member Posts: 845
    I've been getting in...

    but it is loading very slow even right before I typed this.
  • Alan R. Mercurio_3
    Alan R. Mercurio_3 Member Posts: 1,624


    Hi Frank, As far as I can tell it's ok now. I was on last night when I got here to my hotel but I went to bed early so it's possible the site just went done as a glitch.

    From what I can see in the maintenance area no hackers so far.I pray it stays that way.

    I have had another one of our friends write to me regarding the speed, the site has been loading at this past week. I honestly have not noticed but then again I have been very fortunate to be on high speed wireless.

    I do apologize to all of you for any inconvenience this has caused and I'll look into it as soon as I get home latter today.

    Thanks guys!


    Your friend in the industry,
    Alan R. Mercurio

    www.oiltechtalk.com

    There was an error rendering this rich post.

  • Glenn Harrison_2
    Glenn Harrison_2 Member Posts: 845
    Alan, if it helps any...

    I am running high speed broadband, and am seeing the slow loads, but intermitently. Sometimes a page will load right away, sometimes slow, and sometimes the page will almost lock up in transit, and I would have to repeat the page request to get it to load. Now I personally wasn't making a big deal out of it because it could have been on my end also for all I knew.
  • Alan R. Mercurio_3
    Alan R. Mercurio_3 Member Posts: 1,624


    Glenn, and the rest of you guys. Thanks for the feed back. this all seems consistent with the time frame of my adding some buttons with links to the web page on OTT. I have removed them for now. We'll see if that makes a difference.

    Again thanks guys and thank you Dan for making this space available to get this worked out for the guys.

    Your friend in the industry,
    Alan R. Mercurio

    www.oiltechtalk.com

    There was an error rendering this rich post.

This discussion has been closed.

Categories