Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Bobby Darin smooth

Jed_2
Jed_2 Member Posts: 781
in THE MAIN WALL
Was introduced to the Cash-Acme "Shark Bite" fittings today. Has anyone used these, and to what extent? Don't have a link or pic yet, but, was wondering if anyone uses them. They will accept copper, cpvc, and pex. Rated for potable and radiant applications; 180ºF/200PSI.

Jed

Comments

  • Joe Mattiello
    Joe Mattiello Member Posts: 720
    I had this in my file

    I had this on file, and thought I would share it.

    Taco, Inc.
    Joe Mattiello
    Technical Service Technician
    joemat@taco-hvac.com
    401-942-8000 X 484
    www.taco-hvac.com
    Joe Mattiello
    N. E. Regional Manger, Commercial Products
    Taco Comfort Solutions
  • Greg Gibbs
    Greg Gibbs Member Posts: 75
    Watts bites back...

    I just rcvd. this sample fitting from the good people at Watts...
  • Greg Gibbs
    Greg Gibbs Member Posts: 75
    Watts \"Bites Back\"

    I just rcvd. this sample from the good people @ Watts...Greg
  • Jed_2
    Jed_2 Member Posts: 781
    Cool

    Our Watts Rep has never mentioned those fittings. But, my question still stands, other than price, any drawbacks, performance issues?

    Jed

    p.s. Thanks Joe for the pdf.
This discussion has been closed.

Categories