Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
System 2k powervent
Hello,
On a System 2000 Powervent unit they supply a 90 degree stainlees (i think) smokepipe fitting in order for the blower to hang somewhat below the unit.
Is it alright to use a piece of say Hart & Cooley to mount the blower in-line behind the powervent unit where space does not allow for the standard installation?
Thanks,
- Norm
On a System 2000 Powervent unit they supply a 90 degree stainlees (i think) smokepipe fitting in order for the blower to hang somewhat below the unit.
Is it alright to use a piece of say Hart & Cooley to mount the blower in-line behind the powervent unit where space does not allow for the standard installation?
Thanks,
- Norm
0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 159 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 946 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements