Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Problem with leaks on spun end manifolds
Mark Eatherton1
Member Posts: 2,542
as HR would say... Had a bunch of copper, spun end manifolds that had glycol in it that started showing signs of leakage right on the very end of the spun shut manifold. Anyone else experiencing this phenom? Only 5 years old. Thank goodness for ProPress caps...
ME
ME
0
Comments
-
Wanted
to give the non weekend Wallies a shot at this too...
ME0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 105 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 159 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 948 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements