Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Anyone in the Hartford, CT area?

Mad Dog
Mad Dog Member Posts: 2,595
in THE MAIN WALL
Both excellent in all manners. Mad Dog

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=210&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

Comments

  • Dave_61
    Dave_61 Member Posts: 309
    looking for heating pro in Hartford

    I'm wondering if there is anyone on the list from the Hartford, CT area who would like to come give me an estimate for repiping the primary loop on my low mass Lochinvar system.
    Thanks.
    Dave
  • Alan R. Mercurio_3
    Alan R. Mercurio_3 Member Posts: 1,624


    I'll second that motion! :)

    Your friend in the industry,
    Alan R. Mecurio

    www.oiltechtalk.com

    There was an error rendering this rich post.

  • Bill Nye_2
    Bill Nye_2 Member Posts: 538
    Thanks

    Thanks for the vote of confidence, but no thanks. I am currently 'not' self employed. I am enslaved to my current employer and not able to handle anything outside of my job.
  • Dave_61
    Dave_61 Member Posts: 309
    Bill

    Bill,
    I read your post about being real busy...I'm not looking to do this repiping until warm weather as we do have heat. It really could be done at your convenience, when you have a free day. It's just that no one around here is really very knowledgable on the low mass boilers. It looks like about a day of work (reworking primary loop).
    Thanks.
  • Rudy
    Rudy Member Posts: 482
    Thanks guys

    but Hartford is a good 1.5 hrs for me on a light traffic day. I think John Felciano from Moodus may be an option? Felciano Plumbing I beleive is what he goes by, or he may know someone up that way.
  • John Felciano
    John Felciano Member Posts: 411
    Hartford

    Thanks Bob.We are about an hour out of Hartford,but it may be possible.
  • RoosterBoy
    RoosterBoy Member Posts: 459


    here is a very good person David sutton http://beaconmechanical.com/
    tell him RoosterBoy sent you

    bill nye you know david sutton

    good luck
  • Bill Nye_2
    Bill Nye_2 Member Posts: 538
    Lochinvar

    I put one in a bank, 2 air handlers, infloor, and snow melt.
  • Bill Nye_2
    Bill Nye_2 Member Posts: 538
    Dave

    That picture
  • David Sutton_5
    David Sutton_5 Member Posts: 87
    Wow thanks Mad dog

    you forgot about me :(

    i service the hole hartford area Beacon Mechanical Service
    860-844-0111....David Sutton

    ps Thank you Jason !/ e-mail your address also Jason
  • Alan R. Mercurio_3
    Alan R. Mercurio_3 Member Posts: 1,624


    So did I brother and for that I apologize. For some reason I always think of you being closer to Mass.

    Sorry Dave.

    Your friend in the industry,
    Alan R. Mecurio

    www.oiltechtalk.com

    There was an error rendering this rich post.

This discussion has been closed.

Categories