Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
radiant heat

shawn_5
Member Posts: 52
Ok I have a job that we are going to install the 3 rooms of radiant heat. A seperate zone in each room.There is hardwood going on the floor now I want to have all the feed and returns from radiant come back to on manifold.Because all the temps are the same.now could I use the wirsbo telestat heads does anybody recamend these.Are the a nightmare to wire.or are there any other ways.Also on my boiler now there is 3 seperate zones all pumps are pulling back does aybody have a good schematic on how to pipe these the wirsbo propanels are too much money.thanks shawn
0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 105 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 159 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 948 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements