Oil Tech Talk's Boot Camp at Beckett

Alan R. Mercurio_3

Bump :)

Your friend in the industry,<BR>Alan R. Mecurio<BR><BR><a href="http://oiltechtalk.com">www.oiltechtalk.com</a>

Alan R. Mercurio_3

Oil Tech Talk's Boot Camp at Beckett
With Two Days of intense hands-on training!

June, 7th and 8th 2005
and
August, 9th and 10th 2005

The Boot Camp will cover:

Troubleshooting:

Primary controls & cad cells
Transformers and ignitors
Fuel pumps, pressure, vacuum & sizing
Combustion proper draft and excess air Co2, O2 & CO Everything you should know!
Aquastats, thermostats & Zone valves
Low water cut-off both float & probe type

We will be Highlighting Beckett's NX , NX - LE and the AF ll burners
Properly adjusting the Z Dimension with the L-1 & V-1 Head from the M-Series Tube

The program will feature the following new components:
* New Beckett PSC Motors
* New Beckett Electronic Igniters
* New Beckett Controls Including the heat Manager
* New Beckett CleanCut Pump

You'll even have the opportunity to test your skills on the new Honeywell Diagnostic Simulators. Bring your own meters if you wish. And don't worry we'll have plenty of meters on hand if you forget to bring yours.

ALL ATTENDEES AT The SEMINAR Will RECEIVE:
Beckett Training Manuals
Carry The Torch text book
The new Beckett Z-Gauge, Coupler Popper and a whole lot more!

Need a Hotel? Just call 1 800 321 7333 The Holiday Inn located on 1825 Lorain Boulevard. in Elyria, Ohio and tell them you're with the Oil Tech Talk Group. I have made arrangements to secure a block of 20 rooms for 3 Nights This will cost you $79.00 + Tax per night and includes a full hot breakfast buffet!Cut-Off Date for June reservations is May 7, 2005. And the Cut-Off Date for August reservations is July 8, 2005

We'll be departing from the Holiday Inn, in Elyria at 8:00 AM. A shuttle will take us to R. W. Beckett Both days.

The tour of R. W. Beckett's Facility will be from 8:30 AM - 9:30 AM
Presentation, Demonstrations, open discussion and two days of hands on trouble shooting with fully operational equipment from 9:30 AM - 4:30 PM

Cost for this two day educational event is only $175.00 and includes continental breakfast and a hot lunch.

Seating is limited so please sign-up today. I look forward to spending a few days with you!

To register all you have to do is click on the link to The Store at OTT scroll down until you come the workshop you wish to attend. It's that easy

The Store at Oil Tech Talk

Your friend in the industry,
Alan R. Mecurio

www.oiltechtalk.com

Alan R. Mercurio_3

Bump #2 ~

Your friend in the industry,
Alan R. Mecurio

www.oiltechtalk.com