Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Another use for a concrete stamp
hr
Member Posts: 6,106
I have to install a manifold box in a slab tomorrow, so I picked up a plastic lawn sprinkler box.
I used my small grinder to remove the raised lettering, heated my concrete stamp with the torch and set it on the lid.
hot rod
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=144&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
I used my small grinder to remove the raised lettering, heated my concrete stamp with the torch and set it on the lid.
hot rod
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=144&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
0
Comments
-
COOL!
Is this the debut of a new company name???
ME0 -
Little by little
I am switching over to Show Me Radiant for a company name.
Also, I will be donating a concrete stamp to the RPA RadFest in Denver at the end of April, as a raffle item. Get you very own stamp to start labeling all your slabs, boxes, cows, whatever
hot rod
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements