Snowmelt - DF

Dan Foley

We installed this one in November and recently did the start-up. It is approximately 3500 square feet of driveway and parking area in a residential home in North Arlington, VA. We used 3/4" and 5/8" Wirsbo tubing (on two manifolds) powered by a 500k BTU Thermal Solutions boiler. -DF

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=305&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

Dan Foley

Snow!

We got a few inches of snow yesterday so I went by to see if the tekmar snow/ice sensor was working. Sure enough, it was melting as I snapped these photos. The driveway is a stained, stamped concerete made to look like stone. -DF

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

John Jr

My Snow-melt

This is my Snow-Melt system from this mornings storm. The other two are on the same system. 1900sq ft of pavers and 1600 sq ft of paving. Yes it is a Basketball/Tennis court.

I've been praticing for next week. FOUR!

Dan Foley

Nice looking jobs, John. If you could make your photos a little smaller, they would be easier to see I'll be ready for you next week, even though I haven't played since last fall. Bring your checkbook! -DF

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

hydronicsmike

Hey Dan

Beautiful, beautiful, beautiful!! Enough said!

Am glad you are happy with everything. Enjoy your weekend.

Regards,

Mike

Darin Cook_3

Very Nice Dan

That homeowner will get a lot of compliments from his neighbors, esp when they are shoveling. I must say and I am sure you will agree, no matter how many installations your company does, it is still a thrill each and every time to see them start up and perform as you designed them.







Darin

Mad Dog

NIce job bro

How did you pipe the boilers? Never heard of Thermal Solutions...who thaT? mAD dOG

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Dan Foley

Start-up

Thanks, Darin. You are absolutely right. I am like a kid on Christmas when we start up a new system - playing with the controls, valves, dials until it operates exactly as designed. -DF

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Dan Foley

Thermal Solutions

Hey MD, talk to your buddy Glenn. They are made by Burnham's commercial/industrial division. Check out www.thermalsolutions.com for more info. I couldn't get into the mechanical room to snap photos of this job. Here are four Thermal's we used on another snowmelt project. -DF

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Mad Dog

Nice...I will

Mad dog

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"