Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
O.A. for Buderus

Geo_4
Member Posts: 10
I'd like to run an outside air duct to my riello f-3 burner on my Buderus. I was going to use 4" metal pie to help warm it up in the winter but does riello make a connection to go on the burner box for this application?
0
Comments
-
Riello does not offer a "add on" outside air kit. The burner has to be ordered with a fresh air intake. The burner housings are different for the fresh air intake model.
Thanks0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 159 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 946 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements