Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Taco Paneltrol

Options
Mike Reavis_2
Mike Reavis_2 Member Posts: 295
in THE MAIN WALL
Do you have any idea how old these mixing valves are? How about pressure drop across them to give me an idea what size circulator I would need.

Mike

Comments

  • bob elmore
    bob elmore Member Posts: 41


    mike
    I sold these in late 60's I'll look for some old info I may have. I think taco stopped mfgr. in early 70's. if
    I can find anything I'll get back to you
  • RC
    RC Member Posts: 35
    Taco Paneltrol

    There's a reference here in "The Library" about Taco Paneltrol mixing valves.
  • Mike Reavis_2
    Mike Reavis_2 Member Posts: 295
    The house and the boiler date from the late 50's

    thanks
  • Mike Reavis_2
    Mike Reavis_2 Member Posts: 295
    thank you

  • Joe Mattiello
    Joe Mattiello Member Posts: 752
    Taco Paneltrol/5000 series

    Attached is a submittal data sheet for the old Taco paneltrol Taco mixing valve. If you need to replace the valve try the Taco 5000 series. For your reference I attached the submittal data sheet.

    Taco, Inc.
    Joe Mattiello
    Technical Service Technician
    joemat@taco-hvac.com
    401-942-8000 X 484
    www.taco-hvac.com
    Joe Mattiello
    N. E. Regional Manger, Commercial Products
    Taco Comfort Solutions
  • Mike Reavis_2
    Mike Reavis_2 Member Posts: 295
    Whoa, Joe--Who'z betta than you?

    Thanks,
    Mike
This discussion has been closed.

Categories