Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

AMTROL \"Quad Check\"

Options
Howwen
Howwen Member Posts: 11
in THE MAIN WALL
Does anyone have any ewperience with these flo checks. I can not find anything online as far as a manual. I need to do some trouble shooting and I hate to go in blind.

Any help appreciated.

Comments

  • Tom M.
    Tom M. Member Posts: 237
    I ran into one a couple years ago

    and found help here. I am used to Taco Flowchecks which operate in the "closed" position. The Quad-check is positively closed when the shaft is turned to the right and if memory serves me correctly, will operate when the shaft is backed off 4 turns.

    Tom M.
    MathanShor
  • Weezbo
    Weezbo Member Posts: 6,231
    i too would like to further grasp this particular topic

    of inquirery...what i just read was outstanding .it may be about a slightly different Quad check .... a pdf Generating Explainations of Devise Behavior Using Compositional Modeling and Casual Ordering. Gautier and Gruber. heck of a read :)
  • Howwen
    Howwen Member Posts: 11


    Thanks Tom,

    That is the way it seemed to work. All the way in stopped flow, all the way out was gravity, about two turns worked best.
This discussion has been closed.

Categories