Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
ABC SunRay - Enerjet HELP!
Ken_8
Member Posts: 1,640
We have three SunRay GC model:385 (dual fuel) units with blown end cones. See the attachment. Alan "your friend" Mercurio couldn't help, Enerjet said< "Fawgettabowdit" and so I hope one of you can help. Three end cones is all I need to get them through the winter. Will a CRD100-101 end cone fit? I'm willing to try, its straight gass nowadays and the end cone is not all that critical on that fuel.
Thanks!
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=68&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
Thanks!
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=68&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
0
Comments
-
I dont think the Carlin will work Looks like the blastube is stuck to far in the combustion chamber. You may want to call South Shore Oil Heat Supply 508-588-3600 they seem to have most everything Im sure they could ship u something0
This discussion has been closed.
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 94 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 156 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 927 Plumbing
- 6.1K Radiant Heating
- 383 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements