Paslode Stapler

Brian

Does anyone have a good picture of the conversion done to a Paslode stapler to allow it to do radiant.I just ordered one today and hope to use it next week.

Thanks
Brian

pat_3

paslode stapler

sorry, dont have a picture,wondering where you ordered it from?

Brian

Getting it from local lumber yard.Home Hardware in Ontario.

Brian

hr

Are you talking

about the conversion to staple around 1/2" tube. I've not seen the Paslode version, Senco and Duofast are available from Watts Radiant, I believe?

hot rod

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

hr

Are you talking

about the conversion to staple around 1/2" tube. I've not seen the Paslode version, Senco and Duofast are available from Watts Radiant, I believe?

hot rod

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Brian

Yes it is for 1/2" tube.I already have a Wirsbo stapler and didn't want to pay that type of coin again.I may have to come up with my own design but I thought that somebody might have some experience already.

Thanks
Brian

Weezbo

You are not the first to like to see one *~/:)

however ,i think you would either have to make the head for one of those gas (no compressor)paslode your self or go to the manufacture. Senco knows how for the compressor type however it aint zackly cheap*~/:) enjoy

hr

I hand made one

for a Senco PW. I just used a piece of 1/4" thick aluminum and a hacksaw, file and drill to make the nose guide. Depending on the type of gun you have you may need to shorten the driver so you don't shoot the staple right through the tube

hot rod

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"