Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Low mass boiler for commercial building

Options
JC from PA
JC from PA Member Posts: 16
in THE MAIN WALL
Has anyone used,or recomend a manufacturer of a good low mass boiler for a large commercial application? Space is an issue, and I thought maybe a low mass would take up less room and also elimanate standby losses. I am also looking for information that would give me energy and maintenance costs for steam vs. hot water systems in a large commercial setting.

Thanks!!!

Comments

  • Tony_8
    Tony_8 Member Posts: 608
    At what effiency level ?

    Lots of choices out there, dependent upon load and efficiency desired who to look at.
  • Joe Brix
    Joe Brix Member Posts: 626
    Laars

    makes some of the largest condensing boilers I've seen. Rheos goes up to 2.5 million BTU's
  • JC from PA
    JC from PA Member Posts: 16
    Efficiency level

    > Lots of choices out there, dependent upon load

    > and efficiency desired who to look at.



  • JC from PA
    JC from PA Member Posts: 16
    Efficiency level

    I'm looking at everything available in low mass right now.
  • Mike T., Swampeast MO
    Mike T., Swampeast MO Member Posts: 6,928


    Viessmann Vertomat available from 300 mbh to 3,361 mbh inputs. 2-stage and fully modulating burners available. INOX HX so it's sort of like a Vitodens on steroids. Wicked high efficiency. Presume the price is wicked high as well ;)
This discussion has been closed.

Categories