Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Duct design 2 or 3D

Empire_2
Empire_2 Member Posts: 2,340
in THE MAIN WALL
I cannot seem to draw a professional layout so I am looking for a software program to convey my design Ideas for the customer to look at. Need both comm and Res. Thanks. Looking for duct designs.

Comments

  • Weezbo
    Weezbo Member Posts: 6,232
    there is a guy who just opened a virtual tin shop

    look on the new site he has tennsmith...he probably has a pet program or two....HVAC is a good site,they probably having a few offerings. there are lots out there today...for the most part i am into boilers any more,and have about 11 or 12 heat loss programs:)the library here probably has a link to a designe program in the virtual trade show section for tin.there are lots of spendy ones out there,and some are happier with importing and exporting with other programms,...look on HVAC for some much better direction to ventilation take offs,designe.......oh *~/:)
  • Einsiedler_2
    Einsiedler_2 Member Posts: 93
    autocad

    Use Autocad.
    Properly used you can print/view in 2D & 3D (from any angle)

    Learning Curve Required as Acad is not as simple as the other less signifigant programs available.

    EIN
  • Bud_14
    Bud_14 Member Posts: 200


    What's the URL? I'm interested in seeing this virtual tinshop.

    Bud
This discussion has been closed.

Categories