Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Amtrol Boilermate maintenance

davemcsjr
davemcsjr Member Posts: 3
in THE MAIN WALL
After some internet research..I'm still not sure what I can do to our new Amtrol Boilermate oil fired indirect H20 heater. The reservoir/tank is either stainless or polyethelene..neither of which should corrode. I dont beleive there is any anode for it either. And the HOT water is contained within the heating coil...there may be a scaling issue for the coil sometime in the future.

So is there anything I need do do annually to keep this heating well?

Comments

  • Firedragon_4
    Firedragon_4 Member Posts: 1,436
    Nope, that's the whole idea

    behind its design.
  • davemcsjr
    davemcsjr Member Posts: 3


    thanks Dan for the speedy reply...

    I was hoping that was the case..but wasnt sure...I guess you get what you pay for..It was more expensive up front..but pays fro itself in maintenace and increased efficiency

  • Firedragon_4
    Firedragon_4 Member Posts: 1,436
    You can call me Stan,

    or you can call me Man, but please don't call me Dan ;-)

    Thanks,
    Firedragon aka George Lanthier
  • davemcsjr
    davemcsjr Member Posts: 3


    oops..

    I saw the Dan Holohan thingy under your reply and ASSUMED

    and promptly made an **** out of me (at least)

    :)

  • Firedragon_4
    Firedragon_4 Member Posts: 1,436
    No problem here,

    just don't want to get our host upset. No problem, right Dan???

    BTW, Happy New Year!!!!!!!!!!!!!!
This discussion has been closed.

Categories