Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Steam Rad needed

Jeff_17
Jeff_17 Member Posts: 99
Hi Wetheads,

I am looking for ONE steam radiator for my one-pipe steam system. Preferrably the older style...with the scroll work on top. I can use a low one or a high one...COLUMN style ONLY . If you know anyone in NJ, let me know...PLEASE...it is getting cold here!

Comments

  • Robert O'Connor_7
    Robert O'Connor_7 Member Posts: 688
    Jeff..

    Where in Joisey are you? What exit?(just kidding) I may know someone who has a few very ornate ones. Whats the heat loss of the room?..Robert O'Connor/NJ
  • Jeff_40
    Jeff_40 Member Posts: 1
    Heat loss

    The room has a tube style....12 sections...4 tubes...26 inches high. A little large for the room it heats, but I am trying to keep the same heating capacity...just want to replace as I am restoring the house to its 1903 original interior...All the other rads are orig...except this one!

    I would love a new one if you can set me up.
This discussion has been closed.