Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Burnham Boiler
John McArthur_2
Member Posts: 157
I thought this would catch your eye Mr. Stanton !!! You were right about the loose wire on the relay. I took the J-Box apart behind the relay, there was my no power to the circulator problem. Just thought I'd let you know. Thanks for the help !
0
Comments
-
Thanks John
Its always nice to hear back from folks after advice is given to possibly help solve a problem, but for some reason it seldom happens! Thanks for taking the time to let us know its working now. Always glad to be of help!
Glenn Stanton
Manager of Training
Burnham Hydronics
www.burnham.com0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements