3\" 3 way mixing valve?

jalcoplumb_4

Any one know who would make one? 3" four bolt flange. Will be operated by a tekmar 632 control.

Bill_35

3\" 3-way valves

Try contacting Danfoss, they carry the ESBE 3-way valves up to 6^.

BillW@honeywell

Honeywell V5013...

You also will need an actuator and/or linkage. Go to http://www.hbctechlit.honeywell.com, and key in V5013. Available from commercial Honeywell distributors.

tls_9

3 way valve

There are many; Siemens (Powers), Johnson, Honeywell, Invensis,to name a few. There are many imported off brands available too. You can get them with any type of actuator, or none at all.

The following web sites may help:
http://www.cappusa.com/
http://www.us.sbt.siemens.com/home.asp
http://www.sbt.siemens.com/hvp/components/products/valves/default.asp
http://www.paxtoncorp.com/
http://www.invensysibs.com/catalog.shtmlhttp://www.statesupply.com/
http://www.johnsoncontrols.com/

jalcoplumb_4

Thank you all.

For your help.

Tim Doran

Cv

Be sure to get the correct Cv rating for the application if this is for mixing. Also any number of motor speed options to consider.

Tim D.