Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Hydrotherm KN-10 Boiler
Jay_14
Member Posts: 39
Has anyone on the Wall installed a Hydrotherm KN-10 boiler? I realize this is a new product. Here's the website: http://www.hydrothermkn.com/
I think its a really neat concept. Cast iron heat exchanger, condensing (yes, cast iron+condensing), and modulating with a 3:1 turn down ratio.
I think its a really neat concept. Cast iron heat exchanger, condensing (yes, cast iron+condensing), and modulating with a 3:1 turn down ratio.
0
Comments
-
Hydrotherm KN-10 boiler
Yes. We have installed many KN boilers.
Very nice unit. If you have any questions. Let me know.0 -
KN-10
Supposed to be a good boiler. never installed any but people that have liked them. I think they have a minimum flow requirement that other big condensers do not have though0
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements