Tim D., Wirsbo, Anyone! (Jamie)

Jamie_6

As luck would have it. I am almost done the kitchen remodel and I skimmed a Multi-core tube grinding the wet bed back for the threshold. I went through the first PEX, the Aluminum and hit the 2nd PEX. I am still holding pressure but am concerned. Is there anything I can put on the tube?

Good news PLEASE!

Jamie


<A HREF="http://www.heatinghelp.com/getListed.cfm?id=289&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

Dave Stroman

Nope. Don't be silly now, the tube must be replaced. A couple of couplings are much better than leaving the damaged tube.

Dave in Denver

Tim Doran

Splice it

No silver bullet here. You need to cut it out. Use the multipres fitting system if you can.


Tim D.

Jamie_6

@ least it is my own house!

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Tony_8

Just had

a repair similar to that. TOTALLY unnecessary, too. The "expert" mason w/40 yrs experience insisted on 4 control joints cut into a 24x30 garage slab. He cut one to the mesh... on the diaganol of a bend... NIIIICE...