Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

My First Vitodens

Unknown
Unknown
in THE MAIN WALL
Proper mounting surface. Looks GREAT!

First time means you will make mistakes. Take extra care whilst removing air:-)

Gary


<A HREF="http://www.heatinghelp.com/getListed.cfm?id=296&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

Comments

  • Kritz_3
    Kritz_3 Member Posts: 85
    First Vitodens

    Well I got the bones up on the wall this eve. LLH is next, it will
    be mounted above the mixing valve and B.S. & B.R. will feed
    between the 10ga. board and Vito. Hope to be cooking with gas
    this weekend!!! This stuff is Cool Beans!!!

    Steve K.
  • Paul Pollets
    Paul Pollets Member Posts: 3,663
    Check Valves

    I agree w Gary, use of flow checks may reduce flow. The schematics show where Viessmann recommends check valves. If they aren't shown, they're not needed.

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • Kritz_3
    Kritz_3 Member Posts: 85
    Checks

    Thanks for the cudos, Veissmann showed checks in their piping
    diaghram. Well at least the cv is not to high on the Taco flow checks. More images to come.
    Steve
This discussion has been closed.

Categories