Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Expansion Tank Sizing
Bill Armstrong
Member Posts: 2
Anyone know where to find the volume of water in a newer style cast iron radiator, large tube, 4 tubes per section, 36" high, 6 sections? Thanks.
0
Comments
-
Forget the reference to "newer style"---that is confusing.0 -
expansion tank sizing
Bill, on page 59 of the Burnham Heating Hepler, water volumes are listed. Your radiator is rated at 25.5 sq ft EDR. The volume is .103 gallons / sq ft or 26.26 gallons per radiator.0
This discussion has been closed.
Categories
- All Categories
- 86.6K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 54 Biomass
- 423 Carbon Monoxide Awareness
- 98 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 157 Indoor-Air Quality
- 3.5K Oil Heating
- 65 Pipe Deterioration
- 931 Plumbing
- 6.2K Radiant Heating
- 384 Solar
- 15.2K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements