Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Burham Base-Ray Radiator
Joe_42
Member Posts: 1
Need instructions on adding sections to the Burnham radiator. I have all the components but need to disassemble a 3 foot section and then add an 3 foot section to make a 6 foot radiator. This section that needs disassembly has two sleeves (bushings) that join one piece to another. Dont know how to remove these sections without doing damage to the radiator casting. I have the tools to reassemble using new sleeves when joining the parts back together.
0
This discussion has been closed.
Categories
- All Categories
- 86.6K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 54 Biomass
- 423 Carbon Monoxide Awareness
- 98 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 157 Indoor-Air Quality
- 3.5K Oil Heating
- 65 Pipe Deterioration
- 931 Plumbing
- 6.2K Radiant Heating
- 384 Solar
- 15.2K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 42 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements