My Fav Boilers

hvacfreak

http://www.powerflame.com/

hvacfreak

http://www.cbboilers.com/

What a great company , and a KILLER LOGO !! Enough of the Munchkin bullwhatever. Cleaver Brooks is OWNAGE.

bob_25

Tinker-Toys

Try http://www.babcockwilcox.com

oil-2-4-6-gas

.

Cleaver Brooks boilers are very reliable ,and efficient the cadillac of scotch marines but the flex-tubes are a little tough to work on --i worked at the rep for Cleaver Brooks -we do a lot of them --if you need fireside gaskets we get them from 1 of the places that used to make them for CB at a good price --biggest problems are lack of refractory maintenance and doors usually you have to lift them with a jack to line-up --there is a company in westchester that does conversions using a Webster burner--that is a p.o.s. --Powerflames are good for intermediate boilers w/gas pilot --but the pilots can be touchy--Gordon Piatt's are nice for larger firing rates and the pilot takes 2 minutes tops to pull the pilot --

don_52

et al

lest we forget,

http://www.gepower.com/prod_serv/index.htm
http://www.siemenswestinghouse.com/en/index.cfm
http://www.pratt-whitney.com/prod_industrial.asp

and a whole bunch of others,alas CE's been gone so long can't really remember.

hey, the guy's just jazzed a little.

the CB "D's" are about the smallest i see,

what little work there is, but that's another
story.

cheers

don_52

et al

lest we forget,

http://www.gepower.com/prod_serv/index.htm
http://www.siemenswestinghouse.com/en/index.cfm
http://www.pratt-whitney.com/prod_industrial.asp

and a whole bunch of others, alas CE's been gone so long can't really remember.

hey, the guy's just jazzed a little.

the CB "D's" are about the smallest i see,

what little work there is, but that's another
story.

cheers

hvacfreak

Horsepower Thread

1 million btu's ain't nothin in this thread !!! Great links btw.

S Ebels

Too bad

They are now French owned.

BTW, hang a Wieshaupt on the front of any of these boilers and you'd really have something to brag about.

George_15

How about Utica boilers... arent they cast iron and carry a lifetim warranty on the heat exchanger??