Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Creeping heat in baseboard from steam boiler.

We installed a new zone off of the existing steam boiler a couple of years ago modeled after Dan's piping diagram. Everything was perfect for two heating seasons, now the zone is creeping on it's own. I figured it was dirt on the spring check valves, so we replaced them. It didn't work. Any suggestions on the problem? Is using a zone valve a no-no? Taco's new ESP is a positve closing valve.
This discussion has been closed.