Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
hot rods advice

jersey devil
Member Posts: 7
installing replacement boiler in my house.im a commercial tech inquiring about most reliable install.putting in a slant fin cast boiler have bboard on perimeter but am adding radiant to bath & kit.Is the rmb any good? should i do primary sec plus rmb on rad loop?Also will have a indirect hw htr. just trying to find the most reliable but effic way to go. I ve seen hot rods advice and ya know whats up.thanks
0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 938 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements