Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Propex

Unknown
Unknown
in THE MAIN WALL
1/2" is hard enough never mind 5/8" & 3/4" Try using the Multicor (PAP) for baseboard runs. Much easier.

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=296&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

Comments

  • todd s
    todd s Member Posts: 212
    Propex fittings

    What's the trick to making the connection to baseboard ells? I just did the rough on a firstfloor baseboard job and was having a hard time getting the pipe onto the fitting. Theres not much room to get your hand on the pipe with taking the element out of the enclosure. Anyone else find this tough?
  • Todd_9
    Todd_9 Member Posts: 88
    pex connectors

    Thanks Gary, I spoke to a friend of mine this morning and he suggested the same thing. He advised me to use QS fittings rather than propex for the same reason. Live and learn.
This discussion has been closed.

Categories