Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Buderus cut away boilers

hr
hr Member Posts: 6,106
in THE MAIN WALL
The quality and workmanship of this Buderus condensor up their with the Viessmann and MZ.

hot rod


<A HREF="http://www.heatinghelp.com/getListed.cfm?id=144&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

Comments

  • Robert O'Connor_6
    Robert O'Connor_6 Member Posts: 299
    Buderus

    is every bit the player and innovator in the market. They make great products and they provide reasonable support.

    Regards

    Robert

    ME
  • Ted_9
    Ted_9 Member Posts: 1,718


    Just wait until you see it installed in my house :)

    PATRIOT HEATING & COOLING, INC.
  • Glenn Harrison_2
    Glenn Harrison_2 Member Posts: 845
    In picture Mvc-28...

    is that a condensing oil unit? Just curious.

    Do you have model #s for those units so I can keep an eye out for them at the supply house?

    Thanks, Glenn
  • Ted_9
    Ted_9 Member Posts: 1,718


    Wall hung condensing gas units. I think its model GB142. I have the paper somewhere. And It will be out very soon.


    PATRIOT HEATING & COOLING, INC.
  • kevin coppinger_4
    kevin coppinger_4 Member Posts: 2,124
    thats a commercial...

    condensing steel boiler...and its dual fuel....kpc

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • Glenn Harrison_2
    Glenn Harrison_2 Member Posts: 845
    Thanks Ted and Kevin for the info.

    much appreciated.
  • ScottMP
    ScottMP Member Posts: 5,883
    I am

    salivating, waiting for this boiler.

    Buderus makes a great product. I know they did'nt make this wall hung but they'll stand behind it like they did.

    Scott

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • Kal Row
    Kal Row Member Posts: 1,520
    thats the nail in the coffin for the anti aluminum people!!!

    if aluminum is good enough for a company of Buderus's stature - it's good enough for everyone

    now if someone would only make an automatic makeup water treatment feeder, that maintains proper ph...
  • Steven Grady_2
    Steven Grady_2 Member Posts: 10
    GB142 Wall Hung

    Buderus owns a company called Nefit in the Netherlands and they produce this product. This product has been in the market for around 20 years and they have sold 1.5 million units world wide. This product will come with a primary secondary manifold with a Grundfos pump. It will also carry a Limited Lifetime Warranty.
    Sizes
    84K
    106K
    160K
    198K

    PVC venting up to 100ft with the first 3 sizes and 60ft with the largest.

    Thank you for your interest in the product.

    Steve
  • Joe@buderus
    Joe@buderus Member Posts: 165


    Glenn,
    The picture is of the SB series boiler. Burners offered for these are Natural gas or LP gas. Because of oil having a condensate temperature around 130 degree's it is not available for the SB Boiler.

    Thanks to all who stopped by the booth as ISH. It was a pleasure to meet many of you in person!

    Did anyone get a picture of Dan Holohan and "Buddy" the Buderus dog?
  • larry
    larry Member Posts: 91


    Is outdoor reset control available for the GB142? I assume this has a modulating gas valve as well.
  • Mike Kraft_2
    Mike Kraft_2 Member Posts: 398
    A RE: From Mr. Grady!

    Wow..........many of us have been "moist" for this boiler:)I'm hoping a score for some future potentials to hang some of these beauties!!!Buderus has always always always been a great product!

    cheese
  • Steven Grady_2
    Steven Grady_2 Member Posts: 10


    We will be including a indoor reset(t-stat). You will install on the coldest zone and the rest will be slave zones. Outdoor reset to come early 2005. It has a negative preasure gas valve with a variable speed inducer. It will modulate down as low as 30% in 1% incraments. It also has the capability to change the firing rate in the control, so if a customer is going to put on an addition in the next year or so you may derate the boiler.

    Steve
  • S Ebels
    S Ebels Member Posts: 2,322
    Mr Grady !

    Good to see you here at the cutting edge of hydronics! We welcome you to the Wall and look forward to your "inside" info regarding Buderus products. Tell the blue Germans that we would REALLY like to have the 124 for this heating season yet!!
  • Supply House Rick
    Supply House Rick Member Posts: 1,399
    GB142

    Steve where are they? I have 4 sold as of 10/27. Can you even guess so I don't lose the sales...
    Thanks
  • dconnors
    dconnors Member Posts: 215
    GB142

    Looks like it could be January before the boilers arrive. We will keep you posted.
  • Mark Hunt
    Mark Hunt Member Posts: 4,908
    You better be kidding Dave (nm)



    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
This discussion has been closed.

Categories