Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Firerite Pro
Biged
Member Posts: 117
Powered on my firerite pro today and my O2 said zero does that mean my O2 sensor is bad.It's a good thing I had my wet kit wiyh me.
0
Comments
-
Hi Biged, sounds like the O2 sensor is dead. It's no big deal to replace it yourself. Just order one and go to the Bacharach application website - instructions for replacing the sensor are at:
http://www.bacharach-training.com/Pro Maintenance/Prosr.htm
If you have any questions, give me a call.
rudy0 -
Replacing the 02 sensor
Hi Biged, it does sound like the O2 sensor is dead. It's no big deal to replace it yourself. Just order one and go to the Bacharach application website - instructions for replacing the sensor are at:
http://www.bacharach-training.com/Pro Maintenance/Prosr.htm
If you have any questions, give me a call.
rudy0 -
Fyrite Pro
I already shipped it off to Bacharach, they told me it had to be caltbrated after the O2 sensor change.0 -
Hey Rudy,
Did you get my e-mail about my Tech 60 ?0 -
Hi Tony
To be honest, I'm not sure if I got it or not. I've been 'on the road' for the past 4 weeks and have pretty much lost track of everything - I apologize....
I'll be in the office for a couple of days, send me an email or give me a call (740-594-0033) and we'll get it taken care of.0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements