Like teeth on a chicken!

Robert O'Connor_7

Does anyone have a source/supplier of 3&1/2" and 5" cast iron pipe and fitting(s)?? I'm doing a steam project in a 100+ year old building and must adapt. So far I'm drawing a blank. Robert O'Connor/NJ

Mark Hunt

Geeze


I got 3.5" stuff from FW Webb a few years back, but I have no idea if they still have access to it.

The 5" stuff is going to be real tough.

Good luck Rob.

Mark H

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Tom M.

FW Webb

I just logged onto my account where I can access the inventory of my branch and the nearest distribution center. There are lots of 3-1/2"X3" bushings and 5"X4" bushings. Not much else. Hope this helps.

Tom M.

Weezbo

Robert Tomorrow i will ask my buddy....

His dad rounded up all kinds of hens teeth and they have quite a few stashed in 1950 ish pannel vans.here is my buddys phone # 1 907 451 8721..His name is Jhon he may have taken off to Anchorage today as he has two large "Tool boxes" a few of the local plumbers work out of..you might hear them say "good morning K-Supply " dont let that throw you thats just one of the counter men acting out:)) if you tell them what you are looking for they will have some inkling and then the next thing is you want to talk to my buddy so you can get the stuff at whatever He wants to get it to you. the counter guys have no idea what is right ...it is a wonder he lets them keep track of millions of dollars of materials.:)) and he seems to have a lot of buddys in the continetial U.S.A.who are lot like him ...

Dan Foley

3-1/2\"

I needed some 3-1/2" fittings for a steam job we did last spring. My supplier didn't have any on the shelf but was able to overnight the fittings direct from Ward. Hope this helps. -DF

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Boilerpro_3

Columbia Pipe and Supply

in the Chicago area stocks them.

Boilerpro

Unknown

Does it have to be cast iron fittings ?

Did you try to locate malleable steel ? I know 3 1/2 inch is gonna be tough to find in either type . We had a job a few years ago with that odd size and could only find bushings to go one size down . Good luck Robert .

Robert O'Connor_7

Thanks for the replys!

Was tied up yesterday & today and had a wake to go to tonight 80 miles away...WHEW!..Thanks for the teeth leads..Robert O'Connor/NJ

tommyoil

Any luck???

I'm curious Robert. Did you find what your looking for? Could you let me know where if you did? Thanks.

Robert O'Connor_7

tommy...

I've made a few calls with no luck yet, but alot of the people I needed to speak with were out of the office friday. I belive it was a religious holiday. I'll know for sure by tuesday. Thanks!..Robert O'Connor/NJ