Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
who's iso flanges are those in Clammy's post
tim smith
Member Posts: 2,838
Just wondering who makes the iso flanges clammy shows in the buderus install below, they have the drain cock built in it looks like. Any response would be great
0
Comments
-
0
-
valves
nice valves but, just be careful,the last 2 sets I went to buy looked like they drilled bolt holes in wrong place so they elongated them.It made for a little sloppy fit.Dave0 -
they had a recall/....
on the 1" sweat size do to the oblong holes....kpc
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 423 Carbon Monoxide Awareness
- 102 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 935 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements